Lead shielding may be necessary to reduce radiation exposure to laboratory personnel and the public. The following information is provided to ensure lead is handled and used in a safe manner.
NEVER dispose of lead in the regular trash or in radioactive or hazardous waste containers!
All disposal of lead bricks must be done through EHS-Radiation Safety.
Whenever possible, lead shielding should be covered to reduce exposure. Methods of encapsulation include: painting, aluminum sheeting / foil, contact paper or plastic sheeting.
Lead dust can be created when lead is mechanically disturbed as in sanding or filing. Cutting the material with shears creates little dust. Lead that is significantly oxidized is different. The oxide layer is finely divided and could be dispersed, creating an inhalation hazard.
Handling lead with bare hands will potentially contaminate them with lead dust. Ingestion is then possible if hands are not thoroughly washed after handling.
To reduce the chance of lead contamination:
NEVER USE A LEAD BRICK AS A DOOR STOP. THIS PRACTICE IS BANNED AT UVA!
- Wear disposable gloves when handling lead.
- Cloth aprons or lab coats should be worn when handling lead. This practice will help reduce contamination of clothing.
- Wash your hands after handling lead.
- Avoid machining, drilling, cutting lead.
- NEVER leave lead lying around unless you are actively using it. Store lead pieces in a closed box labeled "Lead Shielding for Re-Use".
- NEVER throw lead in the regular trash, place it in a sturdy box labeled "Waste Lead" and request a pick-up from EHS.
- Lead should only be used to shield X-ray and gamma radiation, not high energy Beta particle radiation. Interaction of high energy beta particles with lead shielding will produce X-rays. (Plexiglass should be used as primary shielding for high energy Betas particles).
DO NOT lead bricks to shield I-125. It is overkill! A single sheet or several sheets of lead foil is adequate to shield the low energy X and gamma rays associated with I-125. Shielding beta radiation with lead can lead to the creation of "bremsstrahlung" radiation, which is a secondary X-ray produced when high-energy beta particles interact with the lead atoms.
When building shield walls or enclosures with lead bricks the following requirements must be met:
Bench or structure on which shield is built must be able to withstand the weight of the lead.
The shield structure must be stable and built so that the wall or structure will not collapse or fall over.
Recommended thicknesses of Lead Shielding for Commonly Used Radionuclides:
Lead Shielding Examples
Vinyl coated Lead Sheets have a thick vinyl coating for easier and safer handling.