DESKTOP ERGONOMICS
1) Feet planted firmly on the floor (or on footrest).
2) Arms and thighs parallel to the floor.
3) Upright back resting on the backrest and lumbar support at the natural spinal curve.
4) Neck is upright (not looking up or down) and your eye level is in line with the top of the monitor at an arm's length away.
When you think about an office, what comes to your mind? Is it how spacious it's going to be? What kind of a view it's going to have? Let's add ergonomics in the mix. What do you think is the most important component of office ergonomics?
The most important component is you, the user. Drawing out the principle of fitting the environment to the user, there are several other components that need to fit your needs to create an ergonomically healthy work environment.
What are all the other components that make up an ergonomically healthy work environment?
- Chair adjustability
- Desk adjustability
- Monitor/laptop placement and height
- Keyboard and mouse placement
- Noise, temperature & lighting
You spend one-third of your day at work...make it a comfortable day!
LAPTOP ERGONOMICS
Laptop use presents many opportunities for incorrect posture with accompanying musculoskeletal strain. Laptops and tablets are in widespread use, so it is important to set-up your workstation with the correct accessories to allow use of laptops and tablets while being in a healthy ergonomic posture.
Solutions to consider:
1) Employ a laptop holder to raise the monitor up to the correct height. In picture: Ergotron Laptop arm and Herman Miller Ollin (alphabetically ordered, not ranked). You can also look into laptop stands similar this one on Amazon: Telescopic Laptop stands.
2) Use an external keyboard and mouse to support laptop usage without compromising your posture.
Here's a detailed poster to help you assume correct working posture (graciously provided by UMass, Amherst): Ergonomic posture.
Work From Home webinar:
The webinar below has been created by EH&S of Stanford University and has graciously allowed UVA to display it here. It was published during the COVID-19 pandemic and describes how to best work from home. Stanford resources described in the webinar are not available to UVA faculty, staff, or students.
Go to the Stanford Work From Home webinar hosted on Vimeo.
Examples of incorrect postures:
- The 'C' on the couch: Leading to pain in your neck and upper back.
- The T-rex: Leading to pain in your neck, upper back, shoulders and wrists.
- The standing 'C': Leading to pain in your neck, upper back, shoulders and wrists.
Examples of correct postures:
- Back is fully supported by the backrest: Use a pillow or a thinly folded towel to support your lower back and place it where the natural dip in your spine is.
- Sitting upright without slouching: If present, support your arms with armrests. If not present, adjust desk height so that the desk surface and armrests are level and parallel to the floor.
- Standing upright without slouching. Increase the height of the desk (so that arms are parallel to the floor) and top of monitor is at eye level. Use an anti-fatigue mat to reduce strain from standing on a hard surface.
Ergonomic Assessments
Please note that the ergonomic assessment is free of cost. If you're not yet ready for a full-fledged Ergonomic Assessment or training, feel free to use the Ask an expert form to send us your question!
FAQs:
These points are key to adjusting your chair according to your workspace:
Adjust your seat height to place:
- Feet firmly on the ground or the footrest.
- Knees at/between 90 - 110 degrees unless you feel a pinch in the back of your thighs, then it is recommended to have your knees at 90 degrees.
- Thighs to be parallel to the floor.
- Sitting fully back in your chair, adjust seat pan depth (adjustment to move seat forward and backward) to have approx. 3 inches of gap b/w edge of seat and the back of your knee.
- Adjust the position of the lumbar support (lower back support that's at the back of the chair) to be placed where you have a natural curve in your lower back.
- Adjust backrest reclination for upright support (90 - 110 degrees).
- Adjust armrest height to allow elbows to be between 90 - 110 degrees (lower slope) and in line with the desk surface. If possible, move them closer to keep your elbows closer to your body.
Here are some of the adjustability videos for chairs that we find on grounds:
Steelcase Leap Steelcase Gesture Herman Miller Aeron
Haworth Zody Bodybilt Aircelli Humanscale Freedom (scroll down for adjustability video)
Don't see your chair? Look for a label underneath your chair seat and google the make and model of the chair.
If the chair you currently use isn't adjustable in any of these cases, schedule a chair fitting or an ergonomic assessment for us to take a closer look at your setup.
- Maintain a comfortable eye-monitor distance with top of the monitor at eye level (generally an arm's length away for non-bifocal users-- approximately 24 inches for a 14 to17-inch monitor).
- In case you use progressive/bifocals or trifocals, lower the top of the monitor such that you wouldn't need to raise your head to look at the monitor through designated segments of your glasses.
- Place your primary monitor or laptop perpendicular to the window. Use antiglare screen or blinds (if needed).
- Tilt screen (forward, towards you - 10 to 20 degrees).
- Adjust color, brightness, contrast for eye comfort.
- If you use a document holder, ensure that it's in the same plane as your monitor.
In terms of height:
- If the monitor is too low, you will notice that you've bent your neck downwards to look at the screen.
- If it is too high, you will notice that your head's tilted backward and which can lead to neck/shoulder pain.
In terms of distance:
- If the monitor is too far away, you might notice yourself slouching or leaning forwards and using the backrest of the chair.
- If the monitor is too close, you may be positioning your neck backward that is not in line with the natural curve of your cervical spine.
According to Hedge's 3S's rule, 30 minutes of system use is divided into 20 min of sitting, 8 min of standing and 2 min of stretching (Buckley & Hedge et.al, 2015).
The neutral postures that should be assumed while sitting are applicable to standing posture as well. This implies:
- Wrists and forearms in line and angled between 90 - 110 degrees (downward slope).
- Monitor should be an arm's length away and eye level coinciding with the top of the screen.
Use an anti-fatigue mat or wear shoes with soft soles to avoid standing on a hard surface for longer durations.
Leaning on the principle of the Zone of Convenient Reach (ZCR), your desk space can be divided into three zones:
- Primary zone: This is the area where you keep all the items that you use most frequently. For example, a keyboard, a mouse and phone (if used very frequently). The area occupied by this zone spans around the length of your arm (from your elbow to the tip of the middle finger when your arm is at 90 degrees to the desk) The number of reaches that occur in this zone are >5 times/ min.
- Secondary zone: The area where items used less frequently than the primary zone (1-5 times/min) are placed. For example, books that you occasionally refer to. This area ends at the tip of your middle finger when arm is fully extended.
- Tertiary zone: Area where items that are used rarely (<1 time / min) are placed. For example, plant pots or pictures of people. This area starts beyond the secondary zone.
Credits (scroll further down in the following link for content): Bostontec
- If you use one monitor more than the other, we recommend using it as your primary monitor and placing it in line with your body's centerline.
- If you use both monitors equally for your tasks:
- Place the monitors in a slight 'V' (15 - 30 degrees) formation with the monitors facing you. This can help you prevent twisting your neck to look at the screen.
- Bring the monitors as close as possible to each other and ensure that the connecting point is in line with your body's centerline.
Chairs should provide:
- Adjustable seat height.
- Adjustable arms.
- Adjustable lumbar support with ability to adjust the position and tension.
- Waterfall front: Rounded front edge on the seat pan so that the back of your knee is not pinched by the seat.
- Five legs (stability) wheels.
- Appropriate caster wheels for the surface i.e. Carpet or Hard surface.
- Comfortable seat pan with adjustable depth.
In-office and Work-from-home (WFH) setups have a lot of ergonomic principles in common. The things you have to look for when setting up a WFH office are:
Sitting
- Get a chair that allows your feet to be firmly planted on the floor or footrest, your thighs to be parallel to the ground and your back supported with adequate lumbar support.
- Find a surface where you can place your arms at 90 degrees without shrugging your shoulder:
- If the work surface is low, elevate the laptop/monitor with a couple of books and get an external keyboard and mouse to sync with your arm's level.
- If the work surface is high, try to look for a lower surface, or you can also sit on a chair with higher seat height and if your feet are dangling, use a footrest. (Look at 'How do I adjust my chair' FAQ above).
- If you're working involves typing, get an external keyboard and mouse and place them on the same surface where your arms are parallel to the ground and supported by armrests.
- The top of the monitor/laptop should be at your eye level when your neck is at a neutral position.
- The monitor/laptop is to be placed approximately an arm's length away.
Standing
Points 2,3,4,5 from above are applicable here as well.
You can also use an anti-fatigue mat or wear shoes with soft soles to avoid standing on a hard surface for longer durations. If your arms are resting on a hard surface, put a thinly folded towel to act as a palm rest between the desk and your arms to avoid contact stress.
Short active microbreaks around 2–3 minutes of light intensity exercises every 30 minutes can be taken. This will help an individual combat the negative health consequences related to sedentary behavior like musculoskeletal discomfort, help provide relief from fatigue and stress experienced throughout the workday (Radwan et. al, 2022).
A desk converter is an external device added to an existing fixed height desk that allows an individual to alternate between sitting and standing when working with a computer all day long.
- Stability Issues
Desk converters can wobble or tip, especially with heavier equipment, leading to potential accidents. - Limited Ergonomic Adjustability
Many converters don’t allow fine-tuning for ideal screen and keyboard heights, risking poor posture and strain. - Reduced Desk Space
Converters take up significant surface area, limiting usable workspace for other items. - Adjustment Challenges
Frequent adjustments can be cumbersome, interrupting workflow and reducing productivity.
Extracted from 'article by Alison Heller-Ono, Founder and President/CEO of Worksite International, Inc.
For safety reasons, the Environmental Health and Safety department does not condone the use of treadmills or exercise bikes while simultaneously trying to do computer-based work for the following reasons:
- It can affect the balance of the individual and can be a fall hazard.
- It proves difficult to maintain the correct sitting posture for office work.
EHS does encourage following Hedge's 3S's to stay active at work. For every 30 min of computer-based work:
- 20 min of sitting
- 8 min of standing
- 2 min of stretching is recommended. (Buckley & Hedge et.al, 2015)
STRETCH BREAKS
UVA/EHS would like to thank UVA’s Dean Schlemmer (EHS, retired), Karen Allen (PT, UVA, retired), and Tina Andersen (PT, Bridges Wellness & Physical Therapy Consultants, LLC) for the production of the pictures below.
Please note that the following stretches are not specific to a work-related injury or illness and are only precautionary. Check the health of the chair prior to performing any of the following exercises. For individuals with existing injuries or recurring discomfort, consultation with a healthcare professional is advised to discuss the suitability of these stretches in light of an individual's specific condition(s). If you'd like to ask us a simple question or want us to cover a specific ergonomics related topic, feel free to use this Ask an expert form to convey your thoughts.
Straighten your right arm out and point your hand downwards. Now with the help of your left hand, pull back on your right hand and hold for a few seconds. Repeat the same with your left arm. Reps: 3-5 times for each hand. Pic taken from Adobe stock.
Straighten your right arm out and point your right hand upwards. Now with the help of your left hand, pull back on all your fingers and hold for a few seconds. Repeat the same with your left arm. Reps: 3-5 times for each hand. Pic taken from Adobe stock.
Place your hands on one arm rest and twist your trunk slowly toward that side. Repeat the same on the other side. Beware not to twist your neck too much. Reps: 3-5 on each side.
Sit upright and relax your shoulders. Try to touch your right shoulder with your right ear and repeat the same on the left side. Reps: 3-5 on each side.
While seated in your chair, with your back upright, raise both your arms over your head and lift your right leg and touch your right foot with your left hand. Raise your arms over your head again and now touch the left foot with your right hand. Reps: 3-5 on each side.
Sit upright in your chair with feet firmly planted on the floor. Bend forward to touch your right toe with your left hand and your left toe with your right hand. Seek support with your resting hand when bending in your chair. Reps: 3-5 on each side.
Sit upright in your chair with feet firmly planted on the floor. Bend forward and try to touch the toes of your feet simultaneously. After each rep return to upright posture. Reps: 3-5 times.