Exposure control devices (ECDs) are the primary method used to control inhalation exposures to hazardous substances. The exhaust system consists of a hood, the associated duct work, and a fan. Types of ECDs include fume hoods, vented enclosures for storing large equipment, highly toxic chemicals and gases, and flexible ducts or drops for capturing contaminants near the point of release.
The chemical fume hood is the most common ECD at UVA. When properly operated and correctly used, a chemical fume hood can control gases, dusts, mists, and vapors released by volatile liquids.
Chemical Fume Hoods & Ventilation
Chemical fume hoods are the primary engineering control for capturing and removing hazardous airborne contaminants in laboratories. When used properly, the fume hood will minimize or eliminate exposure, as well as reduce the risk of injury or damage due to explosions, spills, etc. To learn more about fume hoods, how to determine the fume hood is safe to use and guidance for implementing safe work practices, please view the following educational module: Proper Practices for Chemical Fume Hood Use.
Surveys
There are over 1,000 chemical fume hoods used by faculty, staff, and students at UVA. Every hood is surveyed annually by Environmental Health & Safety (EHS).
These surveys are critical in determining whether or not the most important piece of safety equipment in a lab is performing satisfactorily.
The sticker on the face of the hood has instructions on how to operate the fume hood and provides contact information for repair or re-surveys. Sticker color may change from year to year. Modification of the local exhaust ventilation system without approval is prohibited, as changes made to the system may result in unsafe conditions.
Selection, Installation & Testing Guidelines
The guidelines for the selection, installation and testing of chemical fume hoods (CFHs) document provides guidelines related to Chemical Fume Hoods in UVA owned and operated facilities. Also included within this document are suggestions for the optimal placement of CFHs, general room ventilation characteristics and other recommended design elements pertinent to achieving optimal CFH performance.
FAQ
See our Frequently Asked Questions about Chemical Fume Hoods.
When to use a chemical fume hood
Use a chemical fume hood when handling chemicals that have high acute toxicity, are carcinogens, mutagens or are reproductive toxins; anytime your work involves potential exposure to chemicals with a NFPA Health rating of 3 and 4; chemicals are flammable, corrosive or irritating, reactive, potentially explosive; or where heating or agitation may cause chemicals to spatter or aerosolize. Chemicals with particularly low odor thresholds, (e.g., beta-mercaptoethanol, thiols, etc.) should also be handled in a chemical fume hood, regardless if hazardous or non-hazardous.
Use a chemical fume hood when the chemical's safety data sheet indicates under Section 8 Exposure Controls, "provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value".
There may be instances where there is only a very low risk of exposure to the chemicals described above (e.g., use of minimal quantities in a closed system). A risk assessment can be performed to determine if a chemical can be safely handled outside of a chemical fume hood. Contact EHS for assistance with a risk assessment.
Consider upgrading to a glove box or other isolation device for particularly hazardous substances, toxic gases, and highly reactive or explosive/pyrophoric materials, as chemical fume hoods are, under the best of circumstances, only certified to a containment performance of less than 0.1 part per million (ppm) leakage rate.
Perchloric Acid Laboratory Hoods
The use of perchloric acid, particularly in concentrated form (>72%) and used above room temperature, can result in the accumulation of explosive perchlorates on chemical fume hood surfaces and inside ductwork. It is dangerous to use perchloric acid in a conventional fume hood and where other materials (organics, flammables) could mix with perchlorates, resulting in an explosion that could be touched off by friction from simply adjusting the panels and baffles in the hood. Work that involves heating any concentration of perchloric acid or evaporating concentrated perchloric acid must be performed in a perchloric acid fume hood that is designed specifically for use with materials that can deposit shock-sensitive crystalline materials. These hoods are constructed throughout of stainless steel and equipped with water wash-down capabilities.
The water spray should be used whenever perchloric acid is heated in the hood. If a conventional fume hood has been exposed to heated perchloric acid, tests must be conducted to determine if explosive perchlorates have formed on the hood walls and duct system. This must be completed before any inspection, cleaning, maintenance, or any other work is done on any part of the hood interior or exhaust system.
Based on these special needs, which are not provided for in most laboratories, perchloric acid may not be handled in concentrated form (>72%) or manipulated above room temperature (i.e., heated) in any laboratory that is not specially equipped to address the associated hazards.
Specialty perchloric acid hoods are in Jesser Hall and in Wilsdorf Hall. Contact EHS if you believe you need assistance in gaining access to one of these specialty hoods.
Downdraft Tables
Downdraft tables are local exhaust ventilation systems commonly used in laboratory animal facilities to help control exposure to waste anesthetic gas (WAG) and allergens generated during necropsies, surgeries, specimen dissections and other animal manipulations. For more information go to Downdraft tables.
Ductless Fume Hoods
Ductless fume hoods are stand-alone enclosures that use carbon and/or HEPA filters to remove fumes, vapors and particulates from air drawn through the device and then discharge the filtered air back into the laboratory.
Due to the great variety of chemicals that might be used in a research setting, it is difficult to predict the effective lifespan of ductless fume hood filters. Accordingly, EHS does not generally recommend the use of ductless fume hoods in research laboratories.
Ductless fume hoods should never be used to contain highly toxic, flammable, explosive or carcinogenic chemicals; however, they may be necessary as a temporary measure to contain small quantities of chemicals when proper engineering controls (i.e., ducted chemical fume hood or local exhaust ventilation) are unavailable.
Investigators may request EHS approval for use of ductless fume hoods by submitting a written standard operating procedure (SOP) describing the parameters and conditions for safe use. The SOP should include the following information:
- A general statement of intended ductless fume hood use
- Volume of any chemicals
- Frequency and duration of procedures conducted with chemicals
- Largest container size and concentration of chemical (in case of a spill)
- Use of personal protective equipment (e.g., gloves, eye protection, etc.)
- Proposed filter change-out schedule
EHS will conduct a hazard evaluation and issue approval by applying a certification label to the device and reassess certification on an annual basis.
Investigators using ductless fume hoods are responsible for training their personnel on the safe use and limitations of these devices. Modification to approved chemical procedures conducted in ductless enclosures require an updated hazard evaluation by EHS.
Chemical Fume Hoods and Energy Conservation
Chemical fume hoods are highly energy-intensive as they continuously remove conditioned air from a space. Constant volume chemical fume hoods can use more than 3 times as much energy as a single-family home on an annual basis. The energy required for filtering, moving, cooling or heating, and cleaning air is the largest cost in lab facilities. Innovations in chemical fume hood technology and design have succeeded in reducing airflow through chemical fume hoods while maintaining, or increasing, safety and performance.
Variable air volume (VAV) chemical fume hoods exemplify an innovation in chemical fume hood technology.
VAV systems adjust the amount of air that passes through a chemical fume hood while maintaining a minimum velocity for safety. The reduction in air passing through the chemical fume hood when the sash is lowered results in a reduction of outside air that must be reconditioned to replace the air exhausted. The less outside air that must be conditioned results in lower building costs.
Check out the video on the Shut the Sash (energy saving) page that was initiated by the Green Labs Program and now offered annually by UVA Sustainability.